
MOLDS
Polyklear Fiberglass + Resin offers a broad variation of mold and release agents to provide an easier fabrication process at the same time keep the finished output within acceptable quality.
CN POLYESTER FILM (19UMX137CM)
Polyester film, is a polymer resin of the polyester family. Sometimes known as PET (polyethylene terephthalate). In comparison with other common plastic films, Polyklear PET film has higher tensile strength, excellent dimensional stability, low moisture absorption, and good retention of physical properties over a fairly wide temperature range.
POLYKLEAR IS-BR25 SILICONE RUBBER
Polyklear IS-BR25 Silicone Rubber is a brush-type condensation silicone rubber for molding. It can be used with either a clear or blue catalyst according to the mold's preferred working time and color. It has an exceptional working property and library life.
*Sold in set with:
Polyklear IS-H3 Blue Silicone Rubber Catalyst - is a liquid added to silicone rubber to initiate hardening producing flexible mold. It is a fast curing vulcanization agent for Silicone Rubber. The recommended amount is 2%.
Packaging: 1kg, 25kg
THAILAND GYPSUM PLASTER OF PARIS
A fine, white, quick-setting powder that hardens when moistened and allowed to dry. Plaster of Paris from Polyklear is an ideal material for casting molds because it generally does not shrink or crack when dry. Recommended mixing ratio to water is 1:2 by volume
Packaging: 1kg, 5kg, 25kg





