RELEASE AGENTS

Polyklear Fiberglass + Resin offers a broad variation of mold and release agents to provide an easier fabrication process at the same time keep the finished output within acceptable quality.

Back

POLYKLEAR MOLD RELEASE WAX LIQUID

Polyklear Mold Release Wax Liquid is a petroleum-based mixed waxes intended for mold release and lubrication. This can be applied on mold surface either by brush or wiping with rag.

Packaging: 600g, 3kg

POLYKLEAR SILICONE OIL

Polyklear Silicone Oil is used to enhance ceramic materials by optimizing their viscoelastic properties and fortifying the ceramic phase. Using this can revolutionize material properties for various composite applications.

TR-102 MOLD RELEASE PASTE WAX

TR-102 Mold Release paste wax 14OZ from Polyklear is an excellent paste release with good breakdown for fast, even coverage. Formulated for fast drying with a high content of carnauba wax. One application of this on mold surface is good for a maximum of eight number of pulls mold can be used up to 8 times before reapplication of wax.

Packaging: 14oz

TR-111 SLURRY RELEASE WAX

TR-111 Slurry wax release is a soft white refined petroleum- based wax. Slurry wax leaves no discoloration to molded parts. Reapplication is necessary every pull mold can only be used once and would need another application for next part to be molded. This mold-release agent is suited for parts where gloss and cosmetic surface is not a critical requirement.

Packaging: 600g, 3kg