
RESINS
Polyklear Fiberglass + Resin offers a wide assortment of resin types from polyesters, epoxies to vinyl esters. We offer only the highest quality products for different applications.
Resins

POLYKLEAR EPOXY RESIN INFUSION SW-2711
POLYKLEAR EPOXY RESIN INFUSION SW-2711, paired with a specific hardener, is specially-designed for the vacuum infusion (Resin Transfer Molding) process. It possesses a low viscosity to aid in the easier transfer of the resin in vacuum, and a long pot life to allow more working time for the production of large laminates.
Partnered With
POLYKLEAR EPOXY HARDENER INFUSION SW-2711-BM (100:30 resin to hardener ratio)
Properties
Low viscosity
Long pot life
Superior wetting ability on glass fibers and carbon fibers
Excellent mechanical properties
High strength-to-weight ratio
High HDT (Heat Distortion Temperature)
Applications
Marine (ships, yachts, boats)
Alternative energy (wind blades, turbines)
Military/Aircrafts (airplane bodies, propellers, etc.)
Automotive/Transportation (cars, buses, trucks, trains, etc.)

POLYKLEAR EPOXY RESIN SW-2503-A
POLYKLEAR EPOXY RESIN SW-2503-A, partnered with a specific hardener, is specially-designed for hand lay-up process. This is a low-viscosity epoxy resin suitable for use with both glass fibers and carbon fibers, in the production of large-structure products.
Partnered With
POLYKLEAR EPOXY HARDENER SW-2503-B (100:25 resin to hardener ratio)
Properties
Superior wetting ability on glass fibers and carbon fibers
Low viscosity
Excellent mechanical properties
High strength-to-weight ratio
High heat distortion temperature (HDT)
Applications
Marine (ships, yachts, boats)
Alternative energy (wind blades, turbines)
Military/Aircrafts (airplane bodies, propellers, etc.)
Automotive/Transportation (cars, buses, trucks, trains, etc.)

POLYKLEAR EPOXY RESIN SW-2713-A
POLYKLEAR EPOXY RESIN SW-2713-A, partnered with a specific hardener, is specially-designed for hand lay-up process. This is a medium-viscosity epoxy resin suitable for use with both glass fibers and carbon fibers, in the production of large-structure products.
Partnered With
POLYKLEAR EPOXY HARDENER SW-2713-BS (100:30 resin to hardener ratio)
Butanox M-50 at 1-2%
Properties
Superior wetting ability on glass fibers and carbon fibers
Moderate viscosity
Excellent mechanical properties
High strength-to-weight ratio
Applications
Marine (ships, yachts, boats)
Alternative energy (wind blades, turbines)
Military/Aircrafts (airplane bodies, propellers, etc.)
Automotive/Transportation (cars, buses, trucks, trains, etc.)

POLYKLEAR R99-201-01 RESIN-GP PREMIX MARINE THIXOTROPED (PMT)
Polyklear R99-201-01 Resin GP Premix Marine Thixotroped (PMT) is marine grade resin that can be used for various fiber-reinforced lamination purposes. It is certified by Lloyd's Register for shipping and boat construction so it is ideal for marine applications such as boat-making. This may also be used to create household articles such as bath units, car body parts, water tanks, and pipes because of its water resistance and excellent mechanical strength.
Partnered With
Polyklear Butanox M-50 or Polyklear Butanox M-60 at 1-2%
Properties
Lloyd's Register-certified
FDA-certified
High mechanical strength
Outstanding durability
Water resistant
With thixotropic agent or anti sagging properties
Applications
Marine Industry (boats, yachts, buoyant, etc.)
Automotive industry (car and bus bodies, etc.)
Household articles (bath units, pipes, etc.)

POLYKLEAR R99-201-03 PREMIX MARINE CLEAR - NON-TOXIC (PMC)
Polyklear R99-201-03 Premix Marine Clear Non-Toxic (PMC) is non-thixotropic, quick-curing, clear and promoted resin suited for FRP applications. It exhibits good wetting with glass fibers; it gives an excellent effect of transparency on the products. It is certified by Lloyd's Register for shipping and boat construction so it is ideal for marine applications such as boat-making. Polyklear R99-201-03 Premix Marine Clear Non-Toxic is also an FDA certified non-wax resin.
Partnered With
Polyklear Butanox M-50 or Polyklear Butanox M-60 at 1-2%
For vertical applications, add Cabosil Fumed Silica at 0.3 to 0.8%
Properties
Llyod's Register-certified
High mechanical strength
Non-Toxic/Food Grade (FDA-certified)
Excellent transparency
Applications
Marine Industry (boats, yachts, buoyant, etc.)
Automotive industry (car and bus bodies)
Sheet laminations (roofing sheets, greenhouse, etc.)
Clear castings, stone castings

POLYKLEAR R99-300 HIGH ELASTIC WATERPROOFING
Polyklear R99-300 High Elastic Waterproofing is a pre-accelerated, thixotropic type of resin used for making a variety of glass fiber reinforced plastic products. It is most commonly used in waterproofing of roof decks, balconies of buildings because the reinforced laminate produced by this resin possesses excellent elongation and outstanding durability.
Partnered With
Polyklear Butanox M-50 or Polyklear Butanox M-60 at 1-2%
Properties
High elasticity
Weather resistant
Chemical resistant
Water resistant
Abrasion resistant
Applications
Waterproofing

POLYKLEAR R99-400 RESIN-GP CHEMICAL RESISTANCE ISO
Polyklear R99-400 Resin-GP Chemical Resistance ISO is a pre-accelerated, low viscosity and medium reactivity, Lloyd's Register certified ISO grade unsaturated polyester resin. It is glossy, easy to release bubble, quick to get cured and difficult to crack. Used in making high quality FRP products such as boats, canoes, chemical storage tanks and pipes.
Partnered With
Polyklear Butanox M-50 or Polyklear Butanox M-60 at 1-2%
Properties
Excellent mechanical strength
Resistant to acid and alkaline
Lloyd's Register-certified
Food-grade
Applications
Marine (ships, yachts, boats, etc.)
Automotive (cars, bus bodies, etc.)
Chemical engineering (storage tanks, pipes, etc.)

POLYKLEAR R99-402 RESIN-GP VINYL ESTER
Polyklear R99-402 Resin GP Vinyl Ester is a promoted resin that provides excellent mechanical strength and fatigue resistance, and offers superior corrosion resistance against a wide variety of chemicals. POLYKLEAR R99-402 RESIN-GP VINYL ESTER is certified by the Lloyd's Register for shipping and boat construction so it is ideal for marine applications like ship-making. It is compatible with both glass fibers and carbon fibers for production of laminated or molded products.
Partnered With
Polyklear Butanox M-50 or Polyklear Butanox M-60 at 1-2%
Properties
Excellent corrosion resistance
Excellent mechanical strength
Lloyd's Register-certified
FDA-certified
Applications
Marine applications (boats, ships, yachts, etc.)
Corrosion barriers (Chemical storage tanks, chemical reactors, pipes, scrubbers, flue gas stacks, pickling tanks, plating tanks, etc.

POLYKLEAR R99-402-SW RESIN-GP VINYL ESTER
Polyklear R99-402-SW Resin GP Vinyl Ester is a Bisphenol-A type resin that provides excellent corrosion resistance against a broad range of organic and inorganic acids, alkalis, oxidizing chemicals, and salt solutions. Suitability will depend on the chemical itself, its concentration in solution, and the service or operating temperature. It has excellent mechanical properties suitable to be used with glass fiber and carbon fiber.
Partnered With
Polyklear Cobalt Clear/Red 6% at 0.5-1%, and Polyklear Butanox M-50 at 1-2%
Properties
Excellent corrosion resistance
Excellent mechanical strength
Approved by DNV and Lloyd's
Register for marine applications
FDA-certified
Applications
Marine applications (yachts, boats, etc.)
Corrosion barriers
Chemical storage tanks, chemical reactors, pipes, scrubbers, flue gas stacks, pickling tanks, plating tanks, etc. products

POLYKLEAR R99-403-C RESIN-GP GELCOAT CLEAR
Polyklear R99-403-C Resin-GP Gelcoat Clear is a pre-accelerated, thixotropic, Lloyd's Register, isophthalic neo-pentyl glycol unsaturated polyester resin for superior coating purposes. It is suitable for brush and gun spray-up applications.
Partnered With
Polyklear Butanox M-50 or Butanox M-60 at 2-2.5%
Properties
Excellent mechanical properties
Good chemical resistance
High weather resistance
High water resistance
Lloyd's Register-certified
Applications
Topcoat for products requiring UV protection
Chemical resistance coating against seawater

POLYKLEAR R99-500 RESIN-GP SOLID SURFACE
Polyklear R99-500 Resin-GP Solid Surface is a clear, promoted polyester resin which is used for various casting applications like solid surfaces. It has a low peak exothermic temperature which prevents thick resin casts from cracking.
Partnered With
Polyklear Butanox HBO-50 or Polyklear Butanox M-50 at 1-2%
Properties
Slow yellowing effect
Good transparency and high gloss
Low shrinkage
Low peak exothermic temperature
High filler loading
Good pigmenting properties
Applications
Artificial marbles
Synthetic granites
Clear castings
Solid surfaces

POLYKLEAR R99-501 RESIN-GP WATER CLEAR
Polyklear R99-501 Resin GP Water Clear, from the name itself, this resin exhibits excellent clarity and transparency. It is ideal for clear casting as it possesses qualities such as low shrinkage, high reflective index and low peak exothermic temperature. It is an unsaturated polyester resin for making artificial marbles and fashion accessories.
Partnered With
Polyklear Butanox M-50 at 1-2 and Polyklear Butanox HBO-50 at 1-2%
Properties
Excellent transparency
Low shrinkage
Fast bubble release
Low peak exothermic temperature
Applications
Clear castings
Fashion accessories

POLYKLEAR R99-S101 RESIN-GP RIGID FAST-CURED
Polyklear R99-S101 Resin-GP Rigid Fast Cured is general purpose, quick-curing, non-accelerated, high viscous unsaturated polyester resin used for stone casting, general fiber reinforced plastic lamination, and other FRP applications. It is non-tacky when cured, has excellent rigidity, good mechanical properties and good impact strength.
Partnered With
Polyklear Cobalt Clear/Red 6% at 0.5-1%, and Polyklear Butanox M-50 at 1-2%
To reduce viscosity, add Styrene Monomer
For vertical applications, add Fumed Silica at 0.3 to 0.8%
Properties
Excellent rigidity
Good mechanical strength
Lloyd's Register certified
Quick-curing
Applications
Figurines or home decors
Fashion accessories
Stone castings
Small and medium FRP products

POLYKLEAR R99-S200 RESIN-GP FLEXIBLE
Polyklear R99-S200 Resin-GP Flexible is a general purpose flexible resin specially used for creating items with intricate designs. There is less tendency of cracking and fine edges can be achieved because of its flexible nature. It can be mixed with rigid resin to create customized semi flexible resin with higher impact strength.
Partnered With
Polyklear Cobalt Clear/Red 6% at 0.5-1%, and Polyklear Butanox M-50 at 1-2%
Properties
Excellent flexibility
High-impact strength
Low shrinkage
Applications
Mixed with rigid resins to provide some flexibility and impact strength

POLYKLEAR R99-S205-02 RESIN-GP CLEAR PREMIX PROMOTED (CMM-O)
Polyklear R99-S205-02 Resin GP Clear Premix Promoted (CMM-O) is a specially formulated non-thixotropic polyester resin exhibiting good wetting conditions with glass fibers showing an excellent effect of transparency on the products.
Partnered With
Polyklear Butanox M-50 or Trigonox Super 828 at 1-2%
For vertical applications, add Cabosil Fumed Silica at 0.3 to 0.8%
Properties
Good mechanical strength
Excellent wet-out
Non-waxed
Quick-curing
Applications
Small to medium-sized FRP products
Sheet laminations
Surface linings

POLYKLEAR R99-S205-03 PREMIX THIXOTROPED (BQTN-O)
Polyklear R99-S205-03 Premix Thixotroped (BQTN-O) is a non-sagging, quick-curing unsaturated polyester resin for general purpose laminating application. It is non-waxed and pre-accelerated, suitable for both hand lay-up and gun spray-up. Glass fiber reinforced laminates made with this resin possess good mechanical strength, rigidity and durability.
Partnered With
Polyklear Butanox M-50 or Polyklear Trigonox Super 828 at 1-2%
Properties
Good mechanical strength
Quick-curing
Non-waxed
With thixotropic or anti-sagging property
Applications
Sheet laminations (roofing sheets, greenhouse, etc.)
Small marine crafts (boats, watercrafts, motorboats, etc.)
Surface linings and pipe linings

POLYKLEAR RESIN-SP GELCOAT
Polyklear Resin -SP Gelcoat is a pigmented, pre-accelerated, thixotropic, Lloyd's Register certified, isopthalic neo-pentyl glycol unsaturated polyester resin for superior coating purposes. It is suitable for both hand lay-up and gun spray-up applications.
Partnered With
Polyklear Butanox M-50 or Butanox M-60 at 2-2.5%
Properties
Good mechanical properties
Excellent UV resistance
High resistance to color fade
High water resistance
Good chemical resistance
Applications
Topcoat for products requiring UV protection
Chemical resistance coating against seawater