MILLED / WHISKERS / CONTINUOUS FIBERS

ACM Blue Glass Fiber E-Chopped strands are made by bundling thousands or E-glass fiber together and chopping them into specified length. It is mixed with resin to make a dough like mixture of reinforcement. Designed for any type of resin to increase strength and physical properties of FRP products.

Available Packaging: 1kg, 5kg, 20kg, 25kg

ACM BLUE GLASS FIBER E-FILAMENT WINDING ROVING ACM Blue Glass Fiber E-Filament Winding Roving is a single end continuous roving produced from direct brushing. It is specially designed to give high performance stability and excellent strand integrity required for pultrusion, filament winding and weaving process. It is compatible with polyester, epoxy and vinyl ester and phenolic resins.

Available Packaging: 1kg

ACM Blue Glass Fiber Milled is a finely-milled E-glass fiber that is used as filler in making reinforced resin putties for FRP repairs. It increases the mechanical strength and dimensional stability of the resin.

Available Packaging: 1KG, 25KG

ACM Blue Glass Fiber Continuous Roving ARG is a chopping roving mainly designed for the manufacture of glass fiber-reinforced concrete (GRC) composites through the spray method. This glass fiber is coated with Zirconium oxide (16.7%) which makes it alkali-resistant , therefore can resist highly alkaline environments like concrete mixes or applications requiring contact with strongly basic chemicals e.g. storage tanks, pipes, etc.

Available Packaging: 1KG

ACM Blue Glass Fiber E-Spray Roving is used in spray-up fabrication process where it is fed into a chopper gun which chops it into strands to be deposited onto a mold or composite part. It is compatible with a variety of resins like polyesters, vinyl esters, or epoxies, to produce fiber-reinforced plastics (FRPs).

Available Packaging: 17.5kg (ROLL)