
REINFORCEMENTS
Polyklear Fiberglass + Resin provides a variety of Reinforcements consisting of foam boards, mats and other fibrous material to increase structural strength of FRP products.
Reinforcements

ACM BLUE GLASS FIBER E-CHOPPED STRANDS 6MM
ACM Blue Glass Fiber E-Chopped strands are made by bundling thousands or E-glass fiber together and chopping them into specified length. It is mixed with resin to make a dough like mixture of reinforcement. Designed for any type of resin to increase strength and physical properties of FRP products.
Dimensions
N/A
Properties
Corrosion resistant
Increase strength and physical properties
Reduces resin shrinkage
Applications
Small FRP repairs

ACM BLUE GLASS FIBER E-FILAMENT WINDING ROVING
ACM Blue Glass Fiber E – Filament Winding Roving is a single end continuous roving produced from direct brushing. It is specially designed to give high performance stability and excellent strand integrity required for pultrusion, filament winding and weaving process. It is compatible with polyester, epoxy and vinyl ester and phenolic resins.
Dimensions
N/A
Properties
High mechanical strength
Rapid wet-out
Applications
Chemical engineering (reaction tanks, storage tanks, pressure vessels, pipes, etc.)
Military/automotive (drive shafts, bicycle forks, etc.)
Sports (golf club shafts, tennis racquets, fishing rods, etc.)
Marine (oars and paddles for small boats, sailboat masts, etc.)
Aerospace (small aircraft fuselages, tail stabilizers, etc.)

ACM BLUE GLASS FIBER E-WOVEN CLOTH 200
ACM Blue Glass Fiber E-Woven Cloth 200 is a fabric made by interweaving glass fiber rovings and is mainly used for hand lay-up process for large, high-strength FRP products such as boats, railroad carriages, storage tanks and architectural structures, etc. This glass fiber is compatible with polyester, vinyl ester and epoxy resins.
Dimensions
1 kg: 1.00m x 5m
Properties
Area weight: 200 grams/sq.m.
Low moisture content
Fast wet-out rate
High mechanical strength
Good mold ability
Applications
Hand lay-up, vacuum molding or compression molding:
High-strength finishing reinforcement

ACM BLUE GLASS FIBER E-WOVEN ROVING 400
ACM Blue Glass Fiber–E Woven Roving - 400 is made from continuous glass fiber roving which are interlaced into heavy weight fabrics. Used in most cases to increase the flexural and impact strength of laminates. It is ideal for multi-layer hand lay-up applications where great material strength is required. ACM BLUE GLASS FIBER–E WOVEN ROVING - 400 is approved and certified by the Lloyd's Register for use in boatmaking and other constructions made under the Lloyd's Register survey.
Dimensions
1 kg: 1.00m x 2.5m
5 kg: 1.00m x 12.5m
Properties
Area weight: 400 grams/sq.m.
Low moisture content
Fast wet-out rate
High strength
Good mold ability
Compatible with unsaturated polyester resins, phenolic resins, vinyl ester resins and epoxy resins
Applications
Hand lay-up, vacuum molding or compression molding:
Marine (boats, yachts, etc.)
Automotive/Transportation (cabs, cars, buses, trucks, etc.)

ACM BLUE GLASS FIBER E-WOVEN ROVING 600
ACM Blue Glass Fiber–E Woven Roving - 600 is made from continuous glass fiber roving which are interlaced into heavy weight fabrics. Used in most cases to increase the flexural and impact strength of laminates. It is ideal for multi-layer hand lay-up applications where great material strength is required. ACM BLUE GLASS FIBER–E WOVEN ROVING - 600 is approved and certified by the Lloyd’s Register for use in boatmaking and other constructions made under the Lloyd’s Register survey.
Dimensions
1 kg: 1.00m x 1.67m
5 kg: 1.00m x 8.33m
Properties
Area weight: 400 grams/sq.m.
Low moisture content
Fast wet-out rate
High strength
Good mold ability
Compatible with unsaturated polyester resins, phenolic resins, vinyl ester resins and epoxy resins
Applications
Hand lay-up, vacuum molding or compression molding:
Marine (boats, yachts, etc.)
Automotive/Transportation (cabs, cars, buses, trucks, etc.)

ACM BLUE GLASS FIBER E-WOVEN ROVING 800
ACM Blue Glass Fiber E–Woven Roving-800 is made from continuous glass fiber roving which are interlaced into heavy weight fabrics. It is used in most cases to increase the flexural and impact strength of laminates. It is ideal for multi-layer hand lay-up applications where great material strength is required. ACM BLUE GLASS FIBER E–WOVEN ROVING-800 is approved and certified by the Lloyd’s Register for use in boatmaking and other constructions made under the Lloyd’s Register survey.
Dimensions
1 kg: 1.00m x 1.25m
5 kg: 1.00m x 6.25m
Properties
Area weight: 400 grams/sq.m.
Low moisture content
Fast wet-out rate
High strength
Good mold ability
Compatible with unsaturated polyester resins, phenolic resins, vinyl ester resins and epoxy resins
Applications
Hand lay-up, vacuum molding or compression molding:
Marine (boats, yachts, etc.)
Automotive/Transportation (cabs, cars, buses, trucks, etc.)

ACM BLUE GLASS FIBER E-WR/CSM COMBO MAT
ACM BLUE GLASS FIBER E-WR/CSM COMBO MAT is a glass fiber composed of WR 600 and CSM 450 stitched together into one fabric. This mat is especially designed to save labor costs by allowing the faster production of thick, multi-layer laminates. Its stitched nature also allows the fabric layers to stay in place when the mat is brushed during lamination, thus a uniformity in thickness across the whole mat.
Dimensions
1 kg: 1.25m x 0.76m
Properties
Low moisture content
Fast wet-out rate
High mechanical strength
Compatible with multiple resin types
Applications
Hand lay-up, vacuum molding or compression molding:
Marine (boats, yachts, etc.)
Automotive/Transportation (cabs, cars, buses, trucks, etc.)

ACM BLUE GLASS FIBER MILLED
ACM Blue Glass Fiber Milled is a finely-milled E-glass fiber that is used as filler in making reinforced resin putties for FRP repairs. It increases the mechanical strength and dimensional stability of the resin.
Dimensions
N/A
Properties
Finely milled glass fiber filaments
Increases mechanical strength
Reduces resin shrinkage
Applications
Resin repair putties

POLYKLEAR PET FOAM BOARD
A thermoplastic closed cell foam board sheet made from Polyklear Polyethylene Terephthalate PET that produces a lower cost, and structurally sound core product. It is convenient to handle and conform to different shapes.
Dimensions
6mm x 1220mm x 2440mm
10mm x 1220mm x 2440mm
12mm x 1220mm x 2440mm
15mm x 1220mm x 2440mm
18mm x 1220mm x 2440mm
Properties
Chemical resistant
Waterproof
Lightweight
Easily sanded
High thermal resistance
Applications
Alternative energy (nacelle covers, spinners, turbines, etc.)
Automotive (truck side walls, car bodies, etc.)
Marine (hulls and decks, etc.) General (walls and panels)

POLYKLEAR PP HONEYCOMB
Polyklear PP Polypropylene honeycomb sheet is a core material with high compressive strength, and insulation properties widely used for sandwich structures designed for trucks and other structural applications.
Dimensions
6mm x 1150mm x 2300mm
12mm x 1150mm x 2300mm
18mm x 1150mm x 2300mm
25mm x 1150mm x 2300mm
10mm x 1150mm x 2300mm
Properties
High compressive strength to weight ratio
Water-resistant
Good sound insulator
Good thermal insulation property
Applications
Automotive (truck side walls, car bodies, etc.)
General (walls and panels, flooring, bed boards, etc.)

POLYKLEAR PVC FOAM BOARD PLAIN
Polyklear PVC Foam Board Plain is a closed-cell, cross-linked polyvinyl chloride foam sheet. This is mainly used in marine, wind and transportation industries. It's a foam core material for building sandwich structures with very good mechanical properties, thermal stability for components and structures that are lighter and stronger.
Dimensions
6mm x 1000mm x 2160mm
10mm x 1000mm x 2160mm
12mm x 1000mm x 2160mm
15mm x 1000mm x 2160mm
18mm x 1000mm x 2160mm
Properties
Lightweight
Build-up advantage
Easy to fabricate
Self-extinguishing
Very low water absorption
Chemical and UV resistant
Good sound and thermal insulation
Good machinability (can be screwed, nailed, drilled, sawed, glued, painted, etc.)
Applications
Core material in sandwich applications
Architectural decorations (partition boards, decorative shelves, dropped ceilings, etc.)
Furniture (closet doors, kitchen/bathroom cabinets, etc.)
Art projects (building prototypes, models, etc.)

ACM BLUE CARBON FABRIC PLAIN
ACM Blue Carbon Fabric Plain is a bi-directional fabric used for high-end fiber-reinforced plastic (FRP) applications. Compared to glass fibers, this type has higher mechanical strength and strength-to-weight ratio, which makes it very suitable for use in military, marine and aerospace applications, as well as the production of sports equipment.
Dimensions
1kg: 1m x 5m
200g: 1m x 1m
500g: 1m x 2.5m
Properties
Area weight: 200 grams/sqm.
Chemical resistance
High tensile strength and flexural strength
High strength-to-weight ratio
Applications
Hand lay-up, vacuum molding or compression molding:
Aerospace
Military/Transportation
Marine
Alternative energy
Sports equipment

ACM BLUE FIBER MULTI-AXIAL EKB 600
ACM Blue Fiber Multi – Axial EKB 600 is a glass fiber reinforcement with filaments stitched in two fiber orientations, +45 and -45, allowing it to have high strength against applied loads of the same directions. Its stitched nature allows for the free flow of resin resulting to lower resin consumption. This type of reinforcement is suitable for marine, aircraft and other structural FRP applications.
Dimensions
1 kg: 1.27m x 1.31m
Properties
High mechanical strength
Low resin consumption
Applications
Hand lay-up, vacuum molding or compression molding:
Marine (boats, yachts, etc.)
Automotive/transportation (cabs, cars, buses, trucks, etc.)
Construction (FRP claddings, roofing sheets, etc.)
Renewable energy (wind blades, etc.)

ACM BLUE FIBER NETS (ALKALINE RESISTANCE) 130X1M
ACM Blue Fiber Nets is a type of glass fiber which belongs to the family of nets. Because of its excellent alkali resistance, it is used mainly in reinforcing concrete mixes for use in different non-structural applications. It can also be used as reinforcement in asphalt, such as in asphalt waterproofing systems.
Dimensions
1 kg: 1.00m x 7.69m
Properties
Has excellent property and good durability
High alkali resistant
Applications
Architectural panels (precast concrete, cement boards, etc.)
Civil engineering non-structural elements (façade panels, pipes and channels, etc.)
Waterproofing (bituminous or asphalt systems)

ACM BLUE FIBER NETS (ALKALINE RESISTANCE) 80X1M
ACM Blue Fiber Nets is a type of glass fiber which belongs to the family of nets. Because of its excellent alkali resistance, it is used mainly in reinforcing concrete mixes for use in different non-structural applications. It can also be used as reinforcement in asphalt, such as in asphalt waterproofing systems.
Dimensions
1 kg: 1.00m x 12.5m
Properties
Has excellent property and good durability
High alkali resistant
Applications
Architectural panels (precast concrete, cement boards, etc.)
Civil engineering non-structural elements (façade panels, pipes and channels, etc.)
Waterproofing (bituminous or asphalt systems)

ACM BLUE FIBER UNIDIRECTIONAL EKU 600
ACM Blue Fiber Unidirectional EKU 600 is a glass fiber reinforcement stitched in a way that the fiber filaments are arranged at 0° direction, allowing it to have high strength against loads in the same orientation. With unidirectional fiber, one can overlap it at different angles and orientations to maximize strength in different areas while keeping the fabric stiffness.
Dimensions
1 kg: 1.27m x 1.31m
5kg: 1.27m x 6.56m
Properties
High mechanical strength
Low resin consumption
Applications
Hand lay-up, vacuum molding or compression molding:
Marine (boats, yachts, etc.)
Automotive/transportation (cabs, cars, buses, trucks, etc.)
Construction (FRP claddings, roofing sheets, etc.)
Renewable energy (wind blades, etc.)

ACM BLUE GLASS FIBER CONTINUOUS ROVING ARG (ZrO2 16.7%) 2400 TEX
ACM Blue Glass Fiber Continuous Roving ARG is a chopping roving mainly designed for the manufacture of glass fiber-reinforced concrete (GRC) composites through the spray method. This glass fiber is coated with Zirconium oxide (16.7%) which makes it alkali-resistant , therefore can resist highly alkaline environments like concrete mixes or applications requiring contact with strongly basic chemicals e.g. storage tanks, pipes, etc.
Dimensions
N/A
Properties
Alkali-resistant
Easily chopped
Excellent dispersibility
Good mechanical strength
Applications
Architectural panels (precast concrete, cement boards, etc.)
Civil engineering non-structural elements (façade panels, pipes and channels, etc.)

ACM BLUE GLASS FIBER E-SPRAY ROVING
ACM Blue Glass Fiber E-Spray Roving is used in spray-up fabrication process where it is fed into a chopper gun which chops it into strands to be deposited onto a mold or composite part. It is compatible with a variety of resins like polyesters, vinyl esters, or epoxies, to produce fiber-reinforced plastics (FRPs).
Dimensions
N/A
Properties
Easily chopped
Uniform dispersion of the chopped strands
Fast wet-out
Applications
Marine (boat hulls, dinghies, etc.)
Military/Automotive (car and bus bodies, truck fairings, etc.)
General ( bathtubs, shower trays, etc.)